Wardogs Boosting

On WARDOGS battlefield, enemy vehicles are often among the biggest obstacles you face, but they are far from indestructible. Once you know their weak points and the best weapons to counter them, even heavily armored vehicles become easy targets.

The key lies in knowing where to aim, which weapons to use, and when to stop wasting ammunition. Some vehicles can be quickly disabled by targeting their engines or tracks, while others have specific sections that significantly reduce incoming damage.

Bringing the right loadout is also crucial. If you are planning your next setup using Wardogs Cash, prioritize weapons and gear effective against armored vehicles rather than simply maximizing raw firepower.

Here, we provide a detailed analysis of the major vehicles you will frequently encounter in WARDOGS—including Humvee, L2A6 Tank, MH-6 Little Bird, Z20 Lakota, Havoc Attack Helicopter, SPH-2 artillery vehicle, and Ural—along with strategies to defeat them. Mastering these tactics will help you destroy them rapidly and dominate the battlefield.

1. Humvee: Shoot the Tires or Use Explosives

Although dangerous, the Humvee is one of the easier vehicles to handle once you understand its weaknesses.

Destroying with Explosives

Explosives are always the most effective way to deal with this type of vehicle. If you have an RPG-7, just three direct hits are enough to quickly destroy a Humvee. Aim for the engine, cockpit, or rear of the vehicle.

However, landing three consecutive, precise hits with an RPG-7 is no easy task, especially against a moving target. In a team setting, coordinating attacks with multiple players is a more reliable and effective approach.

MAAWS is far more effective by comparison. As long as you avoid areas with damage reduction, a single shot is usually enough to destroy a Humvee.

Targeting Tires to Disable the Vehicle

If you aren't carrying explosives, Humvee's tires should be your primary target.

It takes approximately 5–8 rounds to damage a tire to the initial failure stage, and another 5–8 rounds to completely destroy it, leaving only the wheel rim. If using 5.56mm Armor-Piercing rounds, it takes approximately 10–11 shots to completely destroy a tire.

You do not necessarily need to blow out all four tires. Depending on where you hit, destroying just two tires can severely restrict the Humvee's mobility, thereby significantly reducing the threat it poses.

Do not waste ammunition

It is worth noting that attempting to destroy a Humvee with standard ammunition is futile—like trying to shake a tree with an ant's strength.

A single 60-round magazine might only deplete 5% to 10% of its health, meaning you would expend a vast amount of ammo for negligible results.

Therefore, when facing a Humvee, try to use MAAWS or coordinate with teammates to destroy it with an RPG-7. If you only have standard ammunition, aim for the tires to reduce its threat level or simply retreat; do not waste your magazines.

2. L2A6 Tank: Always aim for the rear.

Due to its active armor, engaging the tank head-on is extremely difficult. Infantry players should avoid attacking the front.

The engine is a critical weak point

The rear of the tank is your primary target. A hit to the engine area from the rear with an RPG-7 deals enough damage to destroy the tank in about three hits.

More importantly, a single RPG-7 hit to the engine can immobilize L2A6. Once the engine is disabled, the tank becomes a stationary target unless someone exits to repair it.

Consequently, targeting the engine is highly valuable, even if you lack the firepower to destroy the tank completely at that moment.

Attacking the tracks

If you cannot attack the rear, the tracks are the next best option.

Aim primarily for the lower half of the tank's mid-to-rear section or the large rear road wheels; attacking the front tracks is usually inefficient because the front of L2A6 is protected by active armor.

Damaging the tracks prevents the tank from repositioning, buying your team more time to strike its vulnerable points.

Rear of the turret

The rear of the tank's turret is also vulnerable to explosive attacks. Especially when you cannot directly target the engine, aiming for the turret with high-damage weapons—such as RPG-7, MAAWS, or C4 charges—is often a smart move.

3. MH-6 Little Bird: Focus fire on the pilot with small arms

Compared to the two heavy vehicles mentioned earlier, MH-6 Little Bird in WARDOGS has relatively weak defenses; a single hit from an RPG-7 or MAAWS is often enough to destroy it. However, the real challenge lies in actually hitting the target.

True to its name, MH-6 Little Bird is highly agile, making it difficult to score a one-hit kill that causes it to crash.

Therefore, rather than trying to destroy the helicopter outright with a launcher, it is more effective to use small arms to target the pilot, who is more exposed. Landing just a few shots on the pilot can force them to retreat for repairs.

This method offers better ammunition efficiency when dealing with MH-6 Little Bird, especially if you aren't confident about hitting it with explosives. If multiple players coordinate their efforts, concentrated small-arms fire becomes a highly viable tactic.

4. Z20 Lakota: Destroy the tail rotor

Destroying Z20 Lakota helicopter is not particularly difficult; it usually takes only two successful explosive hits.

We recommend using MAAWS for this task; it deals more damage than RPG-7, allowing you to take down the target with ease.

Another key point: aim for the tail section.

Hitting the area near the tail-mounted countermeasure launcher can destroy the tail rotor, potentially causing the helicopter to crash. While a skilled pilot might still manage to land and repair the aircraft, losing the tail rotor makes survival extremely difficult.

5. Havoc Attack Helicopter: The main rotor is the key target

Havoc is one of the tougher helicopters to deal with in WARDOGS, but its large size and relatively slow movement make it easier to hit than smaller aircraft. The helicopter's most critical weak point is its main rotor; a single, accurate hit from an RPG-7 or MAAWS is often enough to destroy it.

However, the challenge lies in actually hitting the main rotor directly. The best opportunity arises when Havoc Attack Helicopter is flying with a steep nose-up or nose-down attitude, as this exposes more of its upper structure.

Aside from the main rotor, destroying Havoc outright typically requires two MAAWS hits. Given Havoc's large size and relatively slow flight speed, it is advisable to have two players coordinate the attack to ensure continuous firepower.

6. SPH-2 Artillery Vehicle: Target the Rear

SPH-2 Artillery can be deceptive; if attacked from the wrong angle, it appears much more durable than it actually is.

The key is knowing the right technique: target the rear of the vehicle. Striking the rear damages the engine, preventing the vehicle from escaping. Destroying SPH-2 Artillery by hitting the rear takes approximately three RPG-7 rounds or two MAAWS rounds.

In contrast, attacking from the side or front might require four to five RPG-7 rounds to achieve a kill. Therefore, if time permits, always try to maneuver behind the vehicle before attacking. This is particularly useful when engaging the vehicle from a helicopter or another position that allows for safe, sustained fire.

7. Ural: Focus on the Side and Cargo Bed

Among all WARDOGS vehicles tested, Ural exhibits unique damage characteristics.

Attacking the Side

Even with high-yield explosives, a direct hit to Ural's front end sometimes fails to destroy it. Attacking the side is far more reliable. Whether you target the engine compartment, the cab, or the fuel tank area, a single MAAWS hit is sufficient to destroy the vehicle.

Eliminating the Driver

However, you do not necessarily have to destroy the vehicle immediately. A single RPG-7 round hitting the driver-side window or cab can kill the driver and disable the vehicle. Once the Ural comes to a halt, you can land a follow-up shot to extinguish it.

Don't shoot through the pallets

The cargo pallets carried by Ural are a crucial detail. These pallets can absorb incoming fire; in fact, if you are using an SMG, Ural's main body might remain completely undamaged while the pallets take the hits.

Therefore, if Ural is driving away from you and your shots seem ineffective, it is likely because the bullets are being blocked by the pallets. Instead of firing directly at the rear cargo area, look for opportunities to strike the engine, the cab, or the side of the vehicle.

To summarize, the most important lesson regarding vehicle combat in WARDOGS is this: sheer firepower isn't always the solution. Securing a favorable position and selecting the right targets often yields better results.

When dealing with a Humvee, try to disable the tires or use explosives. Against tanks, avoid the frontal armor and attempt to flank to the rear. When facing helicopters, look for chances to hit the rotors or the exposed pilot rather than blindly dumping ammunition. And when engaging vehicles like Ural, knowing which parts are resistant to damage can save you a significant amount of ammo.

Above all, don't feel compelled to see a fight through to the bitter end just because it has started. If your current weapon and position are yielding poor results, consider repositioning, switching targets, or waiting for a better moment. Knowing where not to shoot is just as important as knowing where to aim.

In Wardogs, while personal skill and weapon precision are crucial for maximizing your win rate, they aren't the whole story. Proper game settings can sometimes be the deciding factor in landing that perfect shot.

Take visual settings, for example. With the upcoming Season 2 introducing a weather system, adjusting specific settings, such as those affecting visibility during heavy rain or dense fog, could give you a tactical edge.

Based on current Wardogs combat mechanics, here are some recommended visual settings tips applicable to most seasons.

Don't blindly use the lowest graphics settings

While lowering graphics settings in Wardogs can help achieve a smoother, more responsive shooting experience and minimize stutter, the key is to strike the right balance rather than blindly setting everything to the minimum.

Wardogs offers various adjustable visual settings, including resolution, textures, shadows, and draw distance. Lowering all of them might boost your frame rate, but it will also significantly degrade image quality, potentially hindering your ability to spot enemies and assess the battlefield.

Furthermore, some settings have a negligible impact on performance; lowering them yields little actual benefit.

Therefore, before adjusting graphics, identify your system's performance bottlenecks. For instance, if the game is primarily GPU-bound, prioritize adjusting settings like upscaling or global illumination.

Disable Picture-in-Picture Scope

Normally, the game only needs to render the view currently visible to you. However, enabling Picture-in-Picture Scope feature forces the game to simultaneously render the view inside the scope.

This places an extra load on your system, leading to a noticeable drop in FPS and stuttering while aiming, without necessarily improving your shooting accuracy.

Consequently, for most Wardogs players, especially those prioritizing competitive performance, this setting is best left disabled.

Choose display settings based on your needs

Generally, Video tab offers two display modes: Windowed Fullscreen and Fullscreen. Choose the former if you value the convenience of switching between windows; choose the latter if you are aiming for a performance edge.

As for the impact on performance, the difference between the two options is negligible. Regarding resolution, simply set it to your monitor's native resolution. If you wish to lower the resolution to boost performance, please continue to the next section.

Resolution and sharpness settings

Using your monitor's native resolution is generally sufficient for playing Wardogs; for instance, if you have a 1080p monitor, set it to 1920×1080.

If performance is lacking at native resolution, lowering the monitor's actual resolution immediately is not recommended; a better approach is to use an upscaling setting.

This allows you to maintain the final output resolution while lowering the internal rendering resolution, thereby achieving a higher FPS.

You can adjust the sharpness settings according to your personal preference. However, if model edges appear overly sharp or exhibit a distinct outlined look, it is best to lower the sharpness for a better overall visual experience.

Should you adjust VSync?

When enabled, the graphics card waits for the monitor to finish displaying a frame before sending the next one, preventing screen tearing in graphically demanding titles like Wardogs.

This results in smoother visuals and can reduce input lag. However, enabling this setting also caps the frame rate, which can lower overall performance.

For Wardogs, simply ensure VSync is enabled; otherwise, avoid making arbitrary adjustments, as doing so could lead to noticeable input lag.

NVIDIA Reflex settings

This setting primarily concerns input lag and the coordination between CPU and GPU. Simply put, it reduces the rendering queue backlog, allowing CPU to hand off tasks directly to GPU after finishing its work on a frame.

Therefore, if your graphics card supports NVIDIA Reflex, the Enabled option is generally recommended. However, if your system suffers from a severe CPU bottleneck, you might consider On + Boost option.

Anti-Aliasing settings

In this settings tab, it is best to avoid FXAA and TAA entirely: the former produces poor image reconstruction, while the latter tends to create blurriness during motion.

As for upscaling technologies like DLSS, FSR, and XeSS, they all inherently incorporate DLSS Anti-Aliasing. This means they capture a low-resolution image and upscale it, attempting to produce visual quality close to native resolution.

While this boosts frame rates when GPU performance is limited, it comes at the cost of image quality and clarity, particularly in distant scenes. The final output quality depends on the specific upscaling preset you choose.

Taking DLSS as an example, it offers presets such as Quality, Balanced, Performance, and Ultra Performance; each scales the image based on a specific percentage of the game's native resolution. Your choice should depend on your hardware configuration.

Additional image quality settings

First, Mesh Details primarily affects the vegetation and terrain tessellation visible in Wardogs. This is usually set to Medium, but you can bump it up to High if you prioritize visual fidelity.

Although this incurs a slight performance hit, the trade-off is worth it for superior distant vegetation and terrain rendering, provided your system can handle the load.

Regarding View Distance, you might assume it only affects distant objects, but it actually impacts nearby objects as well. Since the performance impact is negligible, setting it to High is a safe bet.

Shading setting influences lighting effects, and various scene details in Wardogs, particularly regarding textures and surface quality.

While the lowest shading setting yields higher performance, the visuals look overly simplistic and truly poor. High is the best choice; at the very least, avoid going lower than Low option.

These are some general graphics setting tips for Wardogs. We hope they help you strike the perfect balance between combat efficiency and visual enjoyment!