How to Get Enough Decoders and Complete a Successful Solo Raid in ROB RUN
Views: 30
Published: Nov 21, 2026
In ROB RUN, raiding other players' bases is one of the fastest ways to accumulate wealth, but also one of the easiest ways to lose everything.
Especially when you're acting alone, without teammates to help you move supplies or cover your retreat, a failed raid not only wastes all your decoders but also exposes you to the host and other players' firepower.
The outcome of a raid is largely determined before you even step onto the enemy's territory - adequate preparation, a worthwhile objective, and a thorough understanding of the defense mechanics are far more important than your actions after entering the base.
Decoder Acquisition Path
Decoders are essential consumables for raiding other players' bases. Players need to use them to break through the security system on the outer walls of buildings, gradually reducing defense points until the defense reaches zero before entering.
Currently, there are two main types of Decoders: Uncommon and Epic. There's also a Legendary type, but its acquisition method is not yet fully confirmed.
Uncommon Decoder is the most basic type, reducing defense by 1 point with each use. There are two main ways to obtain it:
- A free reward on page 3 of the Season 1 Battle Pass.
- Randomly dropped while looting safes and containers in Looty Bay.
Epic Decoder reduces defense by 3 points with each use. It's primarily obtained through Barter redemption at Suspicious Door on the right side of Lenny's Motel. There are two redemption options:
- 3 Uncommon Decoders + $10,000.
- 1 Filled Epic Action Camera.
Note that a fully filled Epic Action Camera can also be sold for approximately $100,000. Whether to use it to redeem a ROB RUN Decoder depends on your needs: players who frequently raid should prioritize redeeming it, while those who raid occasionally can consider selling it directly.
Legendary Decoder reduces defense by 5 points per use, which is theoretically optimal, but currently there is no confirmed stable way to obtain it.
It's not available from any merchant's stall, nor is there a barter recipe; it only drops from loot with an extremely low probability. Therefore, players should not include Legendary Decoder in their regular raid budget; it should be treated as an unexpected bonus.
Base Defense Mechanism: Electronic Fuses
Many solo raids fail because the total defense of the target building wasn't calculated correctly beforehand. A ROB RUN's base defense consists of the building's base defense value and the additional defense points provided by Electronic Fuses.
Therefore, the reduction from Decoders you bring must cover this total and be rounded up.
Different rarities of Fuse provide different defense points:
- Uncommon Fuse - 1 point
- Epic Fuse - 3 points
- Legendary Fuse - 5 points
Taking two common raid targets as examples:
Grow Room
Base defense is 5 points, with 9 Fuse slots. Without any Fuse installed, it can be breached with 2 Epic Decoders; if all Legendary Fuses are installed, the total defense reaches 50 points, requiring 17 Epic Decoders.
Chemical Laboratory
Base defense is 3 points, with 6 Fuse slots. Without any Fuse installed, it can be breached with 1 Epic Decoder; with all Legendary Fuses installed, the total defense reaches 33 points, requiring 11 Epic Decoders.
However, a raid in ROB RUN usually requires breaking through more than one line of defense; the base fence must first be breached before entering the target building. For example, a Concrete Fence filled with 9 Legendary Fuse provides a total defense of 55 points and requires 19 Epic Decoders. Adding the 17 needed for Grow Room, the entire raid requires approximately 36 Epic Decoders.
Performing the same raid with Uncommon Decoders would inflate the number to over 100, and each decoder takes about 12 seconds to install - a fatal time cost in patrolled areas.
Therefore, for solo raids, it's recommended to prepare 25-40 Epic Decoders, adjusting the number based on the actual defensive configuration of the fence and the target building.
To shorten preparation time before a raid, you can use ROB RUN money buy to quickly stockpile weapons, ammunition, and other consumables, reducing the time spent repeatedly gathering resources.
Base Selection for Raids
ROB RUN servers undergo a Federal Raid every 7 days, resetting all plots, bases, weapons, and cash. Only cosmetic items and accumulated jail time are retained.
This means that the defensive investment and internal resource levels of most bases you encounter on the server are directly related to the server's runtime. Plots that have only been open for a day or two may not even have had time to fill with Fuse; bases nearing elimination may have been abandoned by their owners, but they might also be storing their last valuable resources in Grow Room for a final push before elimination.
Judging target quality by building composition is much more reliable than plot size. A plot with only a trailer and basic fencing, without a Grow Room or Laboratory, is likely not worth investing in a Decoder - the owner hasn't invested in production, and the expected internal resource value is very low.
Conversely, if these production buildings appear on the plot, even if the main building looks unassuming, these buildings themselves indicate that the homeowner is running a manufacturing chain, with raw materials or finished products available inside.
Solo raids should also avoid other players in the same settlement. When a base is compromised, Security Module may send alerts to online homeowners or relevant clan members, increasing the risk of other players coming to their aid.
Therefore, prioritizing targets in other settlements can reduce the likelihood of conflict with nearby players.
Raid Procedure and Escape
After selecting a target, do not rush to breach the door. First, observe the surroundings for other players, vehicles, gunfire, or police activity to avoid encountering the homeowner or third parties during the raid. Each Decoder takes approximately 12 seconds to install; if attacked during this time, you are easily put on the defensive.
Once you successfully enter the plot, prioritize heading to Grow Room or Laboratory to compromise the target building's Security System. Do not waste time looting the perimeter. Calculate the Decoder consumption for the main gate and target building in advance to ensure that you have enough items to maintain both lines of defense.
Due to time-limited entry permissions, it's recommended to prioritize easily transportable high-value resources and then evacuate as quickly as possible.
Also note that Decoder is only used to breach building defenses; other targets require different items:
- Master Key: Opens player safes inside buildings.
- Lockpick: Opens vehicle trunks.
- Eviction Right: Transfers ownership of the entire plot.
In summary, solo raids in ROB RUN test more than just combat skills. Only by preparing in advance, managing risks, and retreating at the right time can you ensure each raid yields real benefits rather than losing everything.
Google is updating how content is shown. Don't miss our expert gaming guides, item trading insights, and latest patch updates, by setting IGGM as a preferred source.
Recommended Article
-
From Patrol Officer to Captain: Making the Most of Police Duty in Rob Run
-
Why Solo Players Should Join the Police Force First in ROB RUN?
-
How ROB RUN Settlements Make You Rich but Vulnerable?
-
How to Level Up Your Gameplay and Unlock More Opportunities in ROB RUN
-
Why ROB RUN Players Keep Losing Their Loot in Looty Bay?
-
How Do Robberies, Loot and Extraction Work in ROB RUN?







